Estimate on spillover effect of environmental pollution between peripheral areas

ABSTRACT

Interaction of environmental pollution between peripheral areas has become a central topic in the field of resources and environment but little is known about the actual impact on peripheral areas in the current literature. This paper sets out a simultaneous equation model to investigate the spillover effect of environmental pollution between China’s peripheral areas utilizing the panel data of 218 cities in China. Making use of indicators for measuring the impact on environmental pollution, it identifies that environmental pollution between cities of China has a significant two-way spillover effect. After standardization of variables, it is found that the spillover effect of peripheral areas on urban environmental pollution cannot be neglected. Nearly, a third of the environmental pollution level in a city is induced by the environmental pollution in peripheral areas. If the indicator of environmental pollution in peripheral areas is missing, wrong conclusions will be drawn. Therefore, government should shift the emphasis of environmental regulation from local to global, and improve the overall environmental quality through coordinated management of regional environment.     

环境规制、省际产业转移对污染迁移的空间溢出效应

目前我国正在积极地探寻经济增长高质量发展,生态环境与经济持续、稳定的和谐发展至关重要。虽然政府制定了相关的环境治理政策,但我国环境治理整体效果仍然欠佳。自从分税制改革以来,地方政府为了获得较高经济效益,会放松对环境管理,导致环境治理高投入低成效。同时,由于区域经济发展不平衡导致政府在制定相关环境治理政策时带有区域性特点,迫使高污染高能耗企业迁移至环境规制相对薄弱的地区,由此产生污染迁移的现象。基于此,对2003—2017年30个省区市(港澳台和西藏除外)环境污染总指数的空间溢出效应进行探讨,构建动态空间杜宾模型研究环境规制、省际产业转移对污染迁移的影响。研究结果表明:①环境规制总体上对环境污染具有显著直接效应且存在正向空间溢出效应,当某省环境规制强度增加,环境污染总指数会降低,从而引起污染向相邻省份转移,造成相邻省份的环境污染总指数上升。②省际产业转移整体上对环境污染具有显著直接效应且存在负向空间溢出效应,当某省的产业转移到相邻省份时,会缓解本省环境污染,却加重相邻省份的环境污染程度。这就需要中央政府加强对于各省区市的环境管控,统筹各区域的联防联治机制。产业转移承接省份在招商引资的过程中不仅要考虑本省环境承载能力和环境治理能力,还要考虑入驻企业自身污染排放处理能力,并将污染排放指数纳入筛选条件。同时,产业转移承接省份要引入企业的生产工艺、技术、研发团队等,运用技术溢出效应提升区域环境治理水平。     

Alcohol-impaired motorcyclists versus car drivers: A comparison of crash involvement and legal consequence from adjudication data

Introduction: Driving under the influence (DUI) increases the probability of motor-vehicle collisions, especially for motorcycles with less protections. This study aimed to identify commonalities and differences between criminally DUI offenses (i.e., with a blood alcohol concentration (BAC) of 80 mg/dL or higher) committed by motorcyclists and car drivers. Methods: A total of 10,457 motorcycle DUIs and 8,402 car DUIs were compared using a series of logistic regression models, using data extracted from the documents of adjudication decisions by the courts of Jiangsu, China. Results: The results revealed that offenders from the high-BAC group (i.e., 200 mg/dL or higher) accounted for more than 20% of the total DUI offenses, and were more likely to be involved in a crash and punished with a longer detention. Motorcyclists had a higher likelihood of crash involvement, and were also more likely to be responsible for single-vehicle crashes associated with higher odds of injury sustained, compared to alcohol-impaired car drivers. In the verdict, motorcycle offenders were more likely to receive a less severe penalty. Conclusions: Interventions are clearly required to focus on reducing in the high-BAC group of offenders. For alcohol-impaired motorcyclists, their risks of crash and injury against BAC climb more steeply than the risks for car drivers. The factors including frequent occurrences, uncertainty of detection, and short-term sentences may weaken the deterrence effect of the criminalization of motorcycle DUI. Practical Applications: The traffic-related adjudication data support traffic safety analysis. Strategies such as combating motorcycle violations (e.g., unlicensed operators or driving unsafe vehicles), undertaking education and awareness campaigns, are expected for DUI prevention.     

Inhibiting effects by Fe2O3 on combustion and explosion characteristics of ABS resin

The global increase in the use of, and reliance on, plastics has prompted the demand for acrylonitrile-butadiene-styrene (ABS) resin in various fields. With this increased requirement, numerous failures have occurred in the ABS process. Those incidents, resulting from electrostatic discharge, powder accumulation, heat accumulation, construction sparks, and plant fires, have caused dust fire and explosions.In this study, the ABS resin was gleaned from the site and tested for its explosion parameters, including minimum ignition temperature of dust cloud (MIT_C), minimum ignition energy (MIE), and minimum explosion concentration (MEC). To improve loss prevention in the manufacturing process, ferric oxide (Fe₂O₃) as an inert additive was added in the ABS powder. According to the MIE test, Fe₂O₃ has an apparent inhibiting effect on dust explosion for the ABS dust. With the proportion of Fe₂O₃ increased from 25 to 50 mass% in ABS, the MIE increased from 67 to 540 mJ. The explosion tests via 20-L apparatus indicated that Fe₂O₃ mixed with ABS could not increase the MEC significantly. However, the explosion pressure dropped by increasing in the ratio of Fe₂O₃ in ABS. This inerting strategy of ABS was deemed to substantially lessen the probability and severity of fire and explosion.     

Effects of typical additives on the thermal stability of ammonium peroxydisulfate

Ammonium peroxydisulfate (APS), one of the most widely used inorganic peroxides in the process industries, is a thermally unstable peroxide and potent oxidizer due to the presence of peroxy bond in the molecule and is incompatible with most substances. To investigate the effect of typical additives on the thermal decomposition of APS, in this paper, diamine phosphate (DAP), monoamine phosphate (MAP), and aluminum hydroxide (AH) were selected as additives; pure APS and samples with 10 wt% and 20 wt% of additives were first tested by differential scanning calorimetry (DSC). The experiments and analysis showed that the samples with 10 wt% of additive had better thermal stability than those with 20 wt% of additive. After screening, the three groups of 10 wt% AH, 10 wt% MAP, and 20 wt% MAP additive conditions could be considered to have a better thermal stability effect on the thermal decomposition of APS. Four groups of samples were, in turn, tested by Phi-Tec II. The adiabatic results showed two discontinuous exothermic processes; 10 wt% AH promoted the weak exothermic effect in the first stage. In contrast, the three groups of additives in the main exothermic stage showed different degrees of inhibition, and the inhibiting effect was ranked as 10 wt% AH, 10 wt% MAP, and 20 wt% MAP in order. Finally, the self-accelerated decomposition temperature (SADT) was calculated under the 25 kg standard package. The adiabatic results, including SADT, were combined to render feasible recommendations for the use of additives, which provides references for the packaging and transportation of additives and their applications.     

基于BP神经网络的矿车运行时矿井摩擦阻力的预测*

为了快速有效地确定矿车等运输设备在巷道内运行时矿井摩擦阻力的变化情况,克服模拟软件计算量和现场实测工作量大的问题,以巷道风流速度、矿车运行速度、阻塞比、矿车长度4个矿车运行时巷道摩擦阻力的影响因素作为切入点,采用动网格技术模拟得到矿车在巷道内运行时有关矿井摩擦阻力的数据,以此为样本构建基于BP神经网络的矿井摩擦阻力预测模型,运用MATLAB软件进行网络训练,并将BP神经网络预测值与FLUENT模拟值进行对比。研究结果表明:BP神经网络结构比较简单,能以较快速度收敛,预测值与模拟值最大误差在7%以内,该神经网络模型用于求解矿车等运输设备在巷道内运行时摩擦阻力的变化情况是可行的。     

脉冲强光对水中枯草杆菌灭活效果的研究

脉冲强光杀菌技术是近年来开发的一种新型冷杀菌技术,利用强烈的白光闪照进行杀菌。以枯草杆菌为目标微生物,对比研究脉冲强光与紫外线对微生物的灭活效果。并通过改变脉冲强光装置的输入电压和闪照次数,研究了影响脉冲强光杀菌的影响因素。     

Improved models of failure time for atmospheric tanks under the coupling effect of multiple pool fires

Fire accidents of chemical installations may cause domino effects in atmospheric tank farms, where a large amount of hazardous substances are stored or processed. Pool fire is a major form of fire accidents, and the thermal radiation from pool fire is the primary hazard of domino accidents. The coupling of multiple pool fires is a realistic and important accident phenomenon that enhances the propagation of domino accidents. However, previous research has mostly focused on the escalation of domino accidents induced by a single pool fire. To overcome the drawback, in this study, the failure of a storage tank under the coupling effect of multiple pool fires was studied in view of spatial and temporal synergistic process. The historical accident statistics indicated that the accident scenario of two-pool fires accounted for 30.6% in pool fires. The domino accident scenario involving three tanks is analyzed, and the typical layout of tanks is isosceles right triangle based on Chinese standard “GB50341-2014”. The thermal response and damage of a target tank heated by pool fires were numerically investigated. The volume of 500 m³, 3000 m³, 5000 m³ and 10000 m³ were selected. Flame temperature was obtained by FDS, and then was input onto the finite element model. The temperature field and stress field of target tanks were simulated by ABAQUS. The results showed that the temperature rise rate of the target tanks under multiple pool fires was higher than that under a single pool fire. The failure time of the tank under the coupling effect of multiple fires was lower than that under the superposition of multiple fires without the first stage. The stress and yield strength were compared to judge the failure of the target tank. The model of failure time for the tank under the coupling effect of pool fires was established. Through the verification, the deviation of this model is 4.02%, which is better than the deviation of 15.76% with Cozzani's model.     

土地利用变化对土壤有机碳的影响研究进展

研究土地利用变化对土壤有机碳及其动态变化规律,有助于掌握全球气候变化与土地利用变化之间的关系。本文分别从土地利用及其管理方式变化的角度,综合阐述了土地利用变化对土壤有机碳的影响过程与机理。     

普兰店市土地利用景观格局及其生态环境效应研究

基于研究区2010年的土地利用图形数据,选用生态意义较明确的景观特征指数,定量分析了普兰店市景观空间格局及其生态环境效应.结果表明：（1）普兰店市旱地景观面积最大、分布最广,其面积比例为47.1％,林地景观的面积比例也较大,草地和沼泽地的面积比例较小.平均斑块面积0.82 km2/个,景观多样性指数为1.35,优势度指数为0.73,均匀度指数为0.62;（2）大部分旱地景观分布在普兰店市南部,林地景观大多分布在北方.城乡用地、水田则相对集中分布在南部沿海地区;（3）普兰店市的生态环境指数为0.40,生态环境质量总体一般.